Ghost Immobiliser 2

Secures your vehicle from key cloning and stops thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicles data network, CAN, and a unique PIN code must be entered for the engine to start.

Contrary to trackers Ghost does not transmit radio frequency signals & can't be detected by diagnostic tools. Ghost doesn't have LED indicators or buttons that could signal its presence in your car or van.

Anti-key Cloning

The ghost immobiliser was designed to combat key hacking and cloning. The device connects to the CAN data network of your vehicle and https://www.bethany.Top/ (mouse click the up coming internet site) generates a unique pin code push sequence using the buttons that are factory-installed on your dashboard as well as the steering wheel. This stops the thief from being able to start your vehicle. If the incorrect PIN is entered it will stop your engine from starting, making it impossible to drive off with joy and pride.

Ghost immobilisers are new technology that is extremely hard for https://Www.bethany.top/ (dpmall.kr) thieves to defeat. Contrary to physical deterrents, such as wheel locks and steering locks which can be cut or jacked The ghost immobiliser is a discreet electronic device that cannot be recognized by ordinary thieves since it doesn't emit radio signals and operates in a silent manner.

This next generation immobiliser is able to protect your car from a variety of threats including keys that are duplicated, key-hacking, and even relay attacks. It also has the ability to prevent thieves from adding the new key or replacing your ECU in the sense that it will not allow the vehicle to start without entering the correct PIN code first.

The ghost immobiliser 2, unlike other immobilisers, does not require a remote control or key fob to operate. It is able to be deactivated from the driver's phone by using a simple app. This is a great option the time you have to give your car to valet parking, or for maintenance without key fobs.

The Autowatch Ghost-II represents the latest evolution of Ghost's immobiliser. It was designed to be as easy and convenient to use as is possible, yet remains as secure as ever. This is accomplished by integrating the Ghost-II with the vehicle's CAN data network, the full report which means there are no wires that can be hidden or easily found. It comes with an inbuilt feature that allows you to deactivate the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the latest technique used by professional car thieves. Thieves have access to your vehicle's OBD with a laptop, a mobile application, and cables that can be bought online for less than PS50. Once they have access, they can do anything they like to do, from resetting your vehicle's fault codes to tuning your car, or stealing it in less than a minute.

It can prevent your car from being stolen by requiring a unique PIN sequence to be entered with your key fob prior to you can start the engine or leave. It does this by interacting with the vehicle's ECU (Engine Control Unit) via the CAN Data circuit and is totally undetectable to any scan or code grabbing technology. It has a Service/Valet Mode that allows your vehicle to start with no PIN code.

To utilize an OBD hacking device you require an operating system that is capable of reading the OBD protocol. These can be bought for less than PS100 on ebay or Amazon. You'll also require a cable that has OBD pins connected to the CAN Bus. These cables can be purchased at Amazon or Ebay for around PS50. You then need to splice the cable into the wire harness of your car, for example, in the radio wiring harness.

Once the hacker gains access to the OBD port of your vehicle, they can send diagnostics to the system at a high baud rates, which will crash the car's CAN and stop the systems from working. This can cause your car's engine to stall or shut down.

No additional remotes or key fobs required

An immobiliser for your car is a great piece of anti theft technology used by millions of modern vehicles around the globe. Using engine ECU software to prevent vehicles from starting if a false transponder signal is detected by it an aftermarket immobiliser is a great way to protect your vehicle.

However, it could be easy for a thief to circumvent an immobiliser system when they have access to the code that allows them to disable it. A burglar can easily remove the battery from most key fobs by prying them open. They can then use an easy tool to remove the internal circuit board from an immobiliser and replace it with blank. They will then be able start your car.

With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser connects to the vehicle's engine ECU (Engine Control Unit) via a subtle quiet CAN data circuit that is not detectable by diagnostic tools like those used by high-tech thieves. It doesn't include a traditional keyfob, which has an LED indicators, which means it is invisible.

There will be times where you have to disable Autowatch Ghost 2's automatic security for instance, during an valet parking or www.saltf4.net a service job. The ghost CAN immobiliser comes with a specific mode to do this, referred to "Service Mode that is activated by a push of an app on your phone. The car is still operational however the maximum speed is restricted to 36mph.

Contact us today to set up an appointment for a demonstration in our workshop. A member of our team will run through a full breakdown of how the system works and provide you with your owner's manuals, installation certificate, Ghost 2 emergency card and security guarantee.

Simple PIN code Change Process

Ghost is the next-generation device that secures your vehicle without cutting wires or installing key fobs from an aftermarket. It connects directly to the vehicles CAN data network and a personal PIN code is programmed in it using buttons on your steering wheel and the dash. The device doesn't emit RF signals, therefore it is not able to be tampered with. This makes it impossible to detect by sophisticated RF scanning and code grabbing technologies used by modern thieves.

The PIN code sequence can be changed whenever you wish to lock out previous drivers and even includes an override option in the event of forgotten sequences. The installer will guide you through the procedure to accomplish this during installation. The system also has a valet mode feature which can be used to temporarily disable the pin input sequence to allow your garage or mechanic can fix the vehicle without needing to know the pin code. This is ideal for customers who wish to surrender their car for valet parking or service but don't want divulge the pin sequence.

Contrary to Thatcham products that require additional key-fobs to operate, Ghost is a discreet system which takes advantage of the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered through the app on your smartphone. There are no additional LED indicators are thrown, and your car will be protected without any possibility of being disabled.

Every vehicle is tested

A ghost immobiliser, in contrast to key fobs which require you to press buttons, is discretely installed under the dash or on the steering wheel. Only you will know it's there. The device is connected to the vehicle's CAN data network, and the personalised PIN code is programmed into it using buttons that are already present on your car. The system stops your engine from running until this code has been entered prior to. This means that thieves cannot clone your car's existing keys or gain access to the OBD port to gain access to your vehicle.

Ghost can be utilized in all vehicles, including electric cars motorhomes, vans, and bikes. It's also extremely versatile and can be programmed to shut down in various situations. For instance, it can be programmed to enter Valet mode when the vehicle is being transported to a valet parking or a service provider. This allows you to drive your vehicle within the 30mph limit and the ghost immobiliser will activate itself when your vehicle is returned to your possession.

The device can be reset at any time using your personal PIN number. This is great in the event that you lose the code, or in the event that the device becomes unusable.

It is also undetectable by anyone who doesn't know about it is. It does this by running through the buttons on your dashboard and steering wheel and then using the information they transmit to identify the exact button that was pressed. This makes it a secure and reliable security system that cannot be manipulated by RF scanning or jamming, or a door lock pick set.